My 1st Mission "Diplomatic Confrontations Part 1"

Title: Diplomatic Confrontations Part 1
Author: Dionysiius (Ian Steel)
Faction: Federation
Level Requirement: **not sure if has level req. Still learning Foundry but seems to fit what level you are
Author Notes: This is not a diplomatic mission! It starts out at a Diplomatic Conference and at first you meet n greet, but it’s more combat.

Test it out and let me know what you think. Thanks everyone :P

Foundry missions have level requirements either based on location or enemy group. Mainly, if you're mission is based in Gamma Orionis, you have to be a Rear Admiral to access that area, making that your level requirement. Secondly, the requirement is set based on the enemy groups you have placed. For instance, Mirror Federation groups require a level 31 while Borg require 41 (I think?). Just FYI. I've also edited your post a little to bring it inline with the template.

Thanks I had no idea how to set difficulty level. B)

could not find it.

I've had people play and review it. Not sure why you can't I have no problems looking it up in a search. :dry:

Sometimes, missions don't come up when you search. Stop reviewing, then starting again, usually fixes it.

Found and played, good job.

Great mission, Dionysiius, well done!

There were a few grammar mistakes (your / you're), and I was referred to as "Captain [LastName]" once, but other than that, no problems!

Great story, locations, and the right balance of dialogue to combat. Really enjoyed it, looking forward to part 2. :) x

I enjoyed the mission... I really liked the environments, especially the Andorian ground had a nice feel and look to it!

Noticed one problem in that Ambassador Kirik can sometimes be killed by grenades or area of effect weapons during the fire fight on the bridge of the Klingon ship, making it impossible to continue.

I had the same problem on my mission, and had to move the NPC to a safer area. Apparently they're working on incorprating an "invulnerable" option for contacts in the Foundry, but it won't be released for a while :(

[attachment=555]Signature2.jpg[/attachment]